Igloo ICF 18 Instrucciones De Uso página 23

ICF18, ICF32, ICF40, ICF60, ICF80DZ
6.12 Replacing the device DC fuse
1. Disconnect the power supply to the device.
2. Pry out the fuse cover (fig. 4 3, page 5) to access the fuse.
3. Reverse the fuse cover and use the hook to remove the fuse.
4. Replace the defective fuse with a new fuse of the same type (Automotive
Standard blade fuse, 10 A).
5. Re-fit the fuse cover.
6. Reconnect the power supply to the device.
6.13 Replacing the DC plug fuse
➤ Replace the DC plug fuse as shown in fig. 6, page 7.
➤ Disconnect the power supply to the cooler.
➤ Pull the adapter sleeve (A2) off the plug.
➤ Unscrew the screw from the upper part of the housing (A1).
➤ Remove the upper part of the housing from the lower part of the housing
(B1).
➤ Take out the contact pin (B2).
➤ Replace the defective fuse (C2) with a new fuse of the same type and rating
(8A 32V).
➤ Reassemble the plug in the reverse order.
6.14 Replacing the light PCB
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service
agent or similarly qualified person to avoid hazard.
EN
Operation
23