DC Inverter U-match Series Floor Ceiling Type Unit
4.2.1 Outdoor unit dimension
Item
Model
GUHD09NK3FO
GUHD12NK3FO
GUHD18NK3FO
GUHD24NK3FO
GUHD30NK3FO
GUHD36NK3FO
GUHD36NM3FO
GUHD42NM3FO
GUHD42NK3FO
GUHD48NK3FO
GUHD48NM3FO
GUHD60NM3FO
4.2.2 Condensate Drainage of the Outdoor Unit(Only for the heat pump unit) (Fig.10)
(1). It is required to install a drain pipe for the outdoor unit to drain out the condensate water
during heating operation. (only for the heat pump unit)
(2). When installing the drain pipe, apart from the drain pipe mounting hole, all other holes
should be plugged so as to avoid water leakage.(only for the heat pump unit)
(3). Installation Method: Insert the pipe joint into the hole φ25 located at the base plate of the
unit and then connect the drain pipe to the pipe joint.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.