Parker Hyperchill Plus-E ICEP 003E Manual De Uso página 39

4.10 Alarm history
Chiller in operation.
set
Press the buttom " " to see the alarm history.
set
Press the buttom " " to enter.
Use the buttons " "and " " to see the parameters.
(Par. 4.5.5)
set
Press the buttom " " to see the value.
English
5 Maintenance
• The machine is designed and built to guarantee continuous operation; however, the life of its compo-
nents depends on the maintenance performed.
F1 F2
Z
esc
13.0 13.0
• When requesting assistance or spare parts, identify the machine (model and serial number)
set
by reading the dataplate located on the unit. (www.polewr.com.)
F3
1 2 3 1 2 3
5.1 General instructions
F1 F2
!
esc
Before performing any maintenance, make sure the power to the refrigerator is disconnected.
set Y
F3
1 2 3
1 2 3 Always use the Manufacturer's original spare parts: otherwise the Manufacturer is relieved of
all liability regarding machine malfunctioning.
Y
F1 F2
esc
In case of refrigerant leakage, contact qualifi ed and authorized personnel.
Y
set
The Schrader valve must only be used in case of machine malfunction: otherwise any damage
F3
1 2 3 1 2 3
caused by incorrect refrigerant charging will not be covered by the warranty.
F1 F2
5.2 Refrigerant
esc
Charging: any damage caused by incorrect charging carried out by unauthorized personnel will not be
set
F3
1 2 3
1 2 3
covered by the warranty.
Y
The equipment contains fl uorinated greenhouse gases.
At normal temperature and pressure, the R513A refrigerant is a colourless gas classifi ed in SAFETY
GROUP A1 - EN378 (group 2 fl uid according to Directive PED 2014/68/EU);
GWP (Global Warming Potential) = 573.
!
In case of refrigerant leakage, air the room.
ICEP003E-ICEP005E
Z
17/20