Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 6
INSTALLING TANK LEVER
Turn clockwise to remove plastic nut from the lever arm.
Insert lever arm through the hole on the side of tank. The lever should be pointing to the back side of the toilet.
Screw the plastic nut counter clockwise to tighten it.
Hook the chain onto the lever into the furthest hole from the lever. With the lever at rest, the chain should only
be long enough for flapper to close.
NOTE: All CRAFT + MAIN™ toilets come preset and do not need to be adjusted.
STEP 7
INSTALLING TOILET SEAT
Place the seat on the toilet, aligning the holes of the seat with the holes in the back of the toilet bowl.
Insert the screw through the toilet seat holes on the bowl and secure it with the nuts/washers from the bottom
of the toilet. (Figure 3)
Tighten up the nuts from the bottom of toilet, use a regular screwdriver to tighten to fit. (Figure 4)
CAUTION: DO NOT OVERTIGHTEN THE SCREW AS IT MAY CAUSE DAMAGE ON SEAT.
Push the decorative cap down.
Please note: Do not push down on the seat with force, doing so may damage the smooth close mechanism.
© 2024 FGI Industries, Ltd. | CRAFT + MAIN®, DEVEN™, FLUSH GUARD™, and logo designs are trademarks or registered trademarks of FGI Industries, Ltd.
USA: www.flushguardtoilets.com / www.craftandmain.com | CANADA: www.craftandmain.ca
JANUARY 18, 2024
INSTALLATION AND USER GUIDE
DEVEN™ Complete 2-Piece Toilet
TL-5800BFH-EW / TL-5800BFH-RW
Figure 3
Figure 4
5
Publicidad
