Mizu RADA Manual De Funcionamento página 27

5.4 HEATED SEAT TEMPERATURE SETTING
Prerequisite: Sitting on the toilet is required.
It has 4 levels with the following temperatures and how the colour code is displayed on the control.
Ambient temperature
Low approx. 34ºC
Medium approx. 37ºC
High approx. 40ºC
In addition, the temperature is displayed on the toilet's LED display for greater control.
5.5 WATER INTENSITY ADJUSTMENT
Prerequisite: Sitting on the toilet is required.
When any of the washing functions is operating, the intensity at which the
water jet comes out can be regulated between the 5 different intensities
available in these models. By pressing more or less, the water will come out
with greater or lesser power to better adapt to the user's needs.
NIGHT LIGHT
5.6
It is not necessary for the user to be seated for operation.
Pressing the button button activates or deactivates the
courtesy night light.
5.7 ECO MODE
It is not necessary for the user to be seated for operation.
It is activated by pressing the
on the external LED display of the toilet.
It immediately starts the ECO mode, which mainly consists of switching off the seat heating function if it is switched on. In this mode,
the product settings remain as they were set: water temperature, drying air temperature and the same seat temperature, but without
the latter being in operation.
When a seated user is detected, the ECO mode is immediately deactivated and seat heating starts if a temperature is set. When the
user stands up from the toilet, the ECO mode is switched back to ECO mode and the seat heating stops.
No light in the control unit
button when the toilet is switched on. When this mode is activated, the symbol lights up
27