Mizu RADA Manual De Funcionamento página 29

6.4 NOZZLE DESCALING
Anti-cal
6.5 REMOTE CONTROL BATTERY REPLACEMENT
If the red indicator lights on the remote control do not illuminate, the batteries are due for replacement.
To do this, open the back cover of the remote control and replace them with 2 AAA batteries.
Close the control again when finished. The red indicator lights will illuminate indicating that the remote is operational.
6.6 PAIR REMOTE CONTROL
In the case of replacement of the remote control, the following steps must be observed:
·
Switch off the appliance and disconnect it from the main.
·
Press and hold down the dry button
·
Once the lights are illuminated, reconnect the toilet to the main and the control unit will automatically pair with the toilet.
6.7 DISASSEMBLY OF THE TOILET SEAT
To remove the toilet seat cover and replace it, the following steps are necessary:
·
Remove the hinge cover
·
Remove the screws
·
Replace the new cover
·
Install back the screws
·
Cover with the trim
The nozzle orifices can become clogged due to limescale. When this happens, the
water flow rate decreases. To descale it, keep it immersed in commercially available anti-
limescale liquid (vinegar) for about 1 hour. Rinse and reinstall.
1h
It is recommended to repeat this process every 2 months.
on the remote control until the lights on the remote control illuminate.
29