Mizu RADA Manual De Funcionamento página 28

USER MANUAL | RADA | ISLA | ENGLISH
06 CLEANING AND MAINTENANCE
6.1 TOILET CLEANING
· Clean the outside of the product carefully using a soft, damp cloth or sponge. Important:
· It is recommended that the toilet be turned off before cleaning.
· Do not use aggressive products such as bleaches and ammonia. Use only neutral cleaning agents
· Do not pull or push the Nozzle manually. You can remove it by following the steps in section 6.3.
· When cleaning the inside of the toilet, leave the lid open for a few hours to prevent gases from entering the product. Also, do not leave
the product for more than 5 minutes without flushing the toilet.
· Do not spray the water or air outlet with water or cleaning agents that penetrate into the toilet.
6.2 CLEANING THE REMOTE CONTROL
Wipe it gently with a damp cloth. If the remote control is too dirty, you can use a neutral detergent diluted in water.
Do not remove the battery covers for cleaning.
NOZZLE CLEANING / NOZZLE REPLACEMENT
6.3
It is recommended to clean the Nozzle and mouthpiece weekly.
To remove the Nozzle or change the mouthpiece, follow these steps:
· Without being seated on the toilet, press the button on the remote control for a long time (5 seconds).
· The Nozzle will come out for cleaning by self-cleaning the Nozzle.
· Remove the nozzle by turning it anticlockwise to release it once the cleaning process is finished and no more water comes out.
· Clean the Nozzle.
· Insert back the Nozzle.
Press the stop button
2 minutes.
Once inside, the Nozzle performs a self-cleaning process.
Do not pull the Nozzle to remove it as this may damage the Nozzle and affect the proper functioning of the product.
28
Hard
Cl
on the remote control to retract the Nozzle. If this is not done, the Nozzle is automatically retracted after
neutral
soft