Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1.
Depress
clutch/brake
pedal fully and set parking
brake,
2.
Place gearshift
lever in neutral
position.
3.
Place attachment
clutch
in "DISENGAGED"
position,
4.
Turn ignition
key to "STOP"
and remove key.
5.
Make sure the blades
and all moving parts have completely
stopped.
6.
Disconnect
spark plug wire from spark plug and place wire where
it cannot
come in contact with plug,
TO REMOVE
MOWER
1, Place
attachment
clutch
in "DISEN_
GAGED"
position_
2.
Lower attachment
lift lever to its lowest
position.
3,
Disengage
belttension
rod (K) from lock
bracket
(L)o
_,
CAUTION:
Belt tension
rod is spring
loaded,
Have a tight grip on rod and release
slowly.
4.
Remove
mower belt from electric
clutch
pulley (M).
5,
Disconnect
front link (E) from mower
-
remove
retainer
spring and washer,
6,
Go to either side of mower and disconnect
mower
suspension
arm (A) from chas-
sis and rear lift link (C) from rear mower
bracket (D) _remove retainer springs and
washers,
7, Go to other side of mower and disconnect
the suspension
arm and rear lift linko
CAUTION:
After rear lift links are discon-
nected, the attachment
lift lever will be spring
loaded.
Have a tight grip on lift lever when
changing
position
of the lever.
8,
From right side
of mower,
disconnect
anti-sway
bar (S) from right rear mower
bracket
(D) - remove
retainer spring and
washer and pull mower toward you until
the bar fails from the hole in bracket,
9,
Turn tractor steering
wheel to the left as
far as it will go,
10. Slide mower out from under right side of
tractor.
TO INSTALL
MOWER
Follow
procedure
described
in "INSTALL
MOWER AND DRIVE BELT" in the Assembly
section
of this manual,
®
25
Publicidad
