Publicidad
Idiomas disponibles
Idiomas disponibles
TROLLEY (KB4015)
16x M4x8
3.2 Connecting the product to the LP gas cylinder
ATTENTION!
◊ Do not place the gas cylinder on the lower shelf (trolley) as it is too close to the
burner. Risk of explosion!
1.
Place the product on a level, stable and non-flammable surface away from any
object or substance:
Min. distance to materials or substances: 2 meters above and 1 meter sideways.
Min. distance to flammable materials or substances: 8 meters.
2.
Check that both the product and the gas container are in good working order
and that there is an intact seal on the regulator G1.
3.
Connect the gas hose G5 with the gas cylinder G4. Make sure the gas hose is
not bent or under tension.
4.
Turn the operating lever G2 to the 9 o'clock position and press the regulator G1
on the valve of the gas cylinder G4 until you hear a click.
5.
Check the connection by pulling the regulator G1 upwards. It should not
disconnect from the cylinder valve.
6.
Check the connection between the regulator G1 and the gas hose G5 to the
valve and ensure they are secure.
7.
Open the cylinder's valve by turning the operating lever G2 to the 12 o'clock
position.
8.
Always check for leaks after assembling and before using the product (see 3.3
"Checking for leaks"). Risk of fire and injuries!
9.
For the gas to flow, the control knobs on the product and the cylinder valve G2
op the gas cylinder must be opened (12 o'clock position). The spark is emitted
when reaching 1/4 position on a control knob.
30
4x M6x12
2x M10
Publicidad
