Accessmatic Scorpion 1800 Manual De Instalación página 34

7.0 Display the number of the counter.
p1
p7
7.1 Installation direction setting
p1
p8
d0 d1
d1
7.0.1 Press and hold SET, it displays "P1".
7.0.2 Press UP six times, it displays "P7", press SET to show
current situation.
7.0.3 Display the counter´s one hundred thousand bits and the
thousand bits 1 second, displays the counter´s thousand and
hundred bits 1 second, the digital tube does not display 1
second, displays the counter´s ten and one bit second, then
return to standby state.
7.1.1 Press and hold SET, it displays "P1".
7.1.2 Press UP seven times, it displays "P8", press SET to show
current situation.
7.1.3 During the adjusting, if the setting direction is wrong, it only
needs press UP or DOWN key to adjust change the "d0" or "d1" in the
menu of "P8" to solve the problem. At the same time, the door will
automatically reach the door opening limit, after reaching the door
– closing limit, the setting is complete.
7.1.4 Default setting: "d1".
10
Code: SC1800