Installing And Connecting The Appliance; Connection To The Power Supply; Switching On The Appliance; Switching Off And Disconnecting The Appliance - Gaggenau RC 462 Manual De Uso Y De Cuidado

Installing and connecting the appliance

m
CAUTION
Have the appliance installed by an electrician according
to the enclosed installation instructions.
After installing the appliance, wait at least 8 hours before
switching on the appliance. During transit the oil in the
refrigeration system may have moved.
Before switching on the appliance for the first time, clean
the inside of the appliance.
Apart from statutory national regulations, you should adhere
to the connection terms applied by local electricity and water
companies.
Do not remove the transportation protection devices from
the shelves and storage compartments until the appliance
has been installed.

Connection to the power supply

m
WARNING
Avoid electrical shock hazard!
– Plug into a grounded 3 prong outlet.
– Do not remove ground prong.
– Do not use an adapter.
– Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Improper connection of the equipment grounding
conductor may result in electric shock. Have the
appliance checked by a qualified electrician or service
technician if you are in doubt as to whether the appliance
has been properly grounded.
The appliance comes with an UL listed, 3-wire power supply
cord.
The appliance requires a 3-wire receptacle.
The receptacle must be installed by a licensed electrician only.
The receptacle must be fitted with a 10 to 16 A fuse.
m
Please observe in this coherence the following table:
Appliance
Refrigerator 24"
Refrigerator 30"

Switching on the appliance


Press the POWER button
When the appliance has been switched on, the appliance
begins to cool down. When the doors are open, the interior
lights come on.
The preset temperatures (factory settings) are reached
after several hours. Do not put any food in the appliance
beforehand.
m
To change the preset temperatures –> see "Setting the
temperature".
Switching off and disconnecting
the appliance

Switching off the appliance


Press the POWER button

Disconnecting the appliance

If you do not use the appliance for a prolonged period:

Switch off the appliance.

Take all food out of the appliance.

Pull out the mains plug or switch off the fuse.

Clean the appliance interior
(see "Cleaning the appliance").

To prevent odors, leave the doors open.
Maximal load at one time
2 Ampere
2 Ampere
O
.
NOTE
O
.
9