Publicidad
Idiomas disponibles
Idiomas disponibles
Product
description
2-section table of a highly stable structure. Eqquiped
with 1-motor system that allows adjusting height by
means of a button pannel built in the structure. The
backrest inclination is adjusted by gas lift. Headrest
removable cushion with breather hole. Retractable
wheels that allow its simple mobility. PU upholstery of
high quality that eases cleaning. Paper-roll holder in-
cluded.
Unboxing
Open the top of the packaging carefully. Do not
use any sharp-edged items which can damage the
upholstery.
Should the table/bed need to be moved or lifted ( to
take it out from its packaging) then a minimum of 2
people are required. The table must only be lifted by
the metal frame near the wheels.
When you receive the treatment table or bed, make
sure that the packaging contains all the elements ne-
cessary and that there are no missing parts.
After a few small adjustments detailed below, the ta-
ble arrives ready for use.
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /
Installation
The table ref. 2210A arrives folded inside the pac-
kaging with the upholstered part at the bottom. You
should grab the scissor structure and pull it upwards
on both sides, forming a cross.
Slide the part of the structure that has small wheels
on the side which is closest to the upholstery. They
should be inserted into the U-shaped side structu-
re that will serve as a guide. With the two wheels in-
serted into the side guides, slide the structure until it
reaches the final stop. See the next image.
With the scissor cross and the small wheels properly
placed in the guide, attach the motor to the housing
of the structure as indicated in the following image.
Turn the table and insert the headrest. The table is
now ready for use.
ESB65397556
Instruction
Manual
Instruction Manual.
4
Publicidad
