Publicidad
Idiomas disponibles
Idiomas disponibles
Whenever you clean or replace the BLADE UNITdo not
touch the sharp edge of the blade.
Clean the Blade Unit
When cutting tapes with heavy adhesive, the residue will remain
on the blade gradually.
It is necessary to remove the BLADE UNIT for cleaning
Turn the POWER SWITCH off.
Remove the BLADE UNIT by releasing BLADE UNIT RELEASE
LEVER.
Put some alcohol on a clean dry cloth, or use a swab to remove
the residue
Replace the BLADE UNIT.
Lubricate the Blade
Lubricate the blade in order to prevent residue from sticking to
the blade.
Turn the POWER SWITCH off
Remove the BLADE UNIT from the body.
Locate three oil holes on the back side of the top blade.
Drip one drop of BLADE OIL into each hole.
Also lubricate LOWER BLADE GUIDE.
Do not lubricate over and over again.
Wipe the spare oil away by using cotton cloth.
MAINTENANCE
- 11 -
Publicidad
