Difrax C631 Manual Del Usuario página 21

READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THE WARMER.THIS WARMER IS INTENDED FOR HOME USE ONLY.
KEEP THIS MANUAL, BECAUSE IT CONTAINS IMPORTANT INFORMATION. BATCHCODE ON THE PACKAGING.
Congratulations on your purchase of this Difrax Bottle Warmer!
This warmer allows you to prepare food for children at the ideal temperature for serving, in just a few minutes.
Regardless of whether the food was chilled in the fridge or is in room temperature, the warmer heats it quickly and
evenly. The temperature maintenance modes allow you to serve food exactly when necessary. The warmer also
facilitates food defrosting as well a steam cleaning of bottles and small feeding bottle accessories.
When using electrical devices, special safety precautions must be taken including:
•
CAUTION: To protect against electric shock, do not immerse the power cord, plug or body of the device in water or
any other liquid. Protect the device from getting wet and NEVER operate the device when you have wet hands.
•
CAUTION: In order to ensure constant protection against electric shock, the device should only be connected to
sockets with a grounding pin. Always check that the plug is securely plugged into the socket.
•
Before first connection of the device to the mains supply, make sure by checking the nameplate on the bottom of
the device that its voltage is compatible with the voltage from the mains supply. The voltage appropriate for the
Difrax Electric Bottle Warmer is 220-240V.
•
To enable the power cord to be adjusted to a safe length, the device has a slot in the base. It is recommended to
keep the power cord as short as possible. Make sure that the power cord does not hang over the edge of the table
or counter top, and does not touch hot surfaces.
•
A short power cord should be used to reduce the risks of tangling or tripping over a long power cable.
•
Extension cord may be used if they are properly connected to the power cord, secured and are under proper
supervision.
•
If extension cord are used:
The marked voltage of the extension cord should be compatible with the voltage indicated on the device.
1.
The extension cord must be adapted to the device's electrical load, according to the information provided on
2.
the nameplate.
The extension cord must have CE marking.
3.
The extension cord must not have signs of any damage.
4.
The power cord should be secured such that it does not hang from edge of the counter or table top. This will
5.
avoid the possibility of pulling it by children, or anyone accidentally tripping over it.
•
If the device has an grounding pin type plug, applied extension cord must be 3 conductor cable with the grounding
pin.
•
When removing the plug from the socket, hold the edge of the socket. Never pull the plug out of the socket by
pulling on the power cord.
•
Do not carry the device by the power cord.
•
Do not place any power cords under furniture or other obstacles.
•
DO NOT put on or near a hot gas or electric stove, or in a preheated oven. Make sure that the power cords are away
from hot surfaces, radiators and central heating pipes. Do not leave the device directly in the sun.
•
NOTE! Do not use any device with a damaged power cord or plug, after a failure of the device or any other damage.
For safety reasons, the replacement of a damaged power cord or any repair should be carried out by the
DIFRAX BOTTLE WARMER
SAFETY INFORMATION
19
EN