Difrax C631 Manual Del Usuario página 28

Please note that hot vapour is emitted while the warmer is in operation. Be especially careful as it can cause severe
9.
burns. Avoid contact with the skin. Keep your face and hands at a safe distance and do not place them above the
warmer while it's in use. To avoid the possibility of burns, never move or carry the warmer while it is working.
Once all the water evaporates, the warmer turns off automatically, signalling the end of the cycle with a "Dee-Dee-
Dee" sound. To stop the warmer during the cycle, press the button
it from the power supply.
Wait a few minutes for the cleaned items and the warmer to cool down. Always use a cloth when removing a bottle.
10.
When removing small items, lift them together with the basket to avoid the possibility of burns, and tip them onto a
clean towel. Note! Do not touch the warmer's body or heating chamber, because they are hot.
Important!
•
DO NOT place electrical appliances or components containing metal inside the warmer due to the risk of damage.
•
DO NOT use bleaches or chemical solutions / disinfectant tablets in the warmer or for the products that will be
scalded in it.
•
Always follow the cleaning instruction for items which will be placed in the appliance.
After some period of use, as a result of the heating process, limescale may build up on the heating chamber (depending
on the water quality). The limescale should be removed regularly to ensure proper operation of the warmer. The
heating and steaming time is greatly prolonged if a lot of limescale collects on the heating chamber.
Before removing the limescale, the warmer should be disconnected from the power supply and allowed to cool fully. To
remove the limescale, add 100 ml of warm water and 50 ml of vinegar to the heating chamber. This solution should
be left inside the warmer for up to 30 minutes. Any longer time may cause damage to the product. When the scale
dissolves, pour out the solution and rinse the heating chamber with clean water.
Note!
•
Do not use any commonly available descalers, especially those containing citric acid.
•
Never turn the warmer on while removing limescale.
•
Failure to follow the correct descaling instructions can cause irreparable damage to the product.
•
The use of mineral drinking water will accelerate the process of limescale deposition on the heating chamber.
•
Fill the warmer with boiled/demineralized water, as this prevents limescale build-up on the heating chamber.
•
The presence of limescale on the heating chamber is not subject to complaint.
•
Maintenance of the warmer, other than cleaning or limescale removing, is not required.
•
After use, do not forget to pour out the water.
•
Do not store the warmer filled with water.
•
If the warmer is not used, do not put bottles or other objects inside the heating chamber.
•
Unplug from the socket when not in use, and always before cleaning.
•
Clean the body and the inside of the warmer with a soft cloth or sponge, then dry it with a clean cloth or a paper
towel.
•
NEVER put the warmer in water or wash it under running water.
•
DO NOT place the warmer in the dishwasher.
•
For cleaning the warmer use only clean water, to prevent stains forming.
•
Do not use abrasive sponges, scouring agents or any caustic substances or chemicals for cleaning.
•
Keep the warmer away from direct sunlight, sharp edges and other hazards.
DESCALING
CLEANING AND STORAGE
26
to turn off the warmer, and then disconnect