In the Difrax warmer, you can easily defrost gradually in a water bath food frozen in a storage bags or containers
dedicated for food freezing.
Place the warmer on a flat and stable surface, out from the reach of children, and where it cannot be knocked or
1.
moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.
Add about 200 ml of water to the empty heating chamber.
2.
Place the basket in the warming chamber.
3.
Put the frozen food in a bag or container into a basket.
4.
Plug the warmer into the power socket.
5.
button. Remember! Never turn on the warmer when there is no water in it.
Press the power
6.
Press the function
7.
to 35˚C. As in the case of heating food in a bottle/container, the defrosting time depends on the same factors and its exact
determination is not possible.
After complete defrosting, stir the container to mix the separated fat particles with the remaining volume of milk
8.
and pour into the bottle. To heat the milk placed in bottle to a temperature suitable for serving to a child, use the
„fast heating" mode.
Note!
NEVER defrost the food by using the "fast heating" mode.
•
NEVER refreeze previously defrosted milk.
•
Dispose of any milk that has not been used.
•
In the Difrax warmer you can easily steam clean a bottle and other small accessories used for bottle and breast feeding
(e.g. breast covers).
Place the warmer on a flat and stable surface, out from the reach of children, and where it can't be knocked or
1.
moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.
Add 75-85 ml of water to the empty heating chamber.
2.
Place the basket in the heating chamber.
3.
Important! Before beginning steam clean process, wash all the elements according to the instructions provided by
their manufacturer, and rinse thoroughly.
Insert a bottle into the basket (upside down) or loosely arrange small accessories such as a feeding teat, cap, sealing
4.
disc, and bottle cap (bottom up).
When steam cleaning other accessories used for babies or nursing mothers, place the items in the basket in such a way as
to leave enough room for the hot vapour to reach them easily.
Place fitting ring onto the warmer body to limit the amount of hot vapour that escapes.
5.
Plug the warmer into the power socket.
6.
Press the power button
7.
Press the function button
8.
Note! This function is steam cleaning only, if you want to disinfect a bottle and other small accessories you can use
Difrax microwave sterilizer.
FOOD DEFROSTING
button, selecting the bottle mode
STEAM CLEANING
. Remember! Never turn on the warmer when there is no water in it.
selecting the "fast heating" option with the
, and then use the „
icon.
25
-
" button to set the temperature
EN