Publicidad
Idiomas disponibles
Idiomas disponibles
Accessories and spare parts
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by
Würth masterService should be arranged. With
any enquiries or spare parts orders, always quote
the item number as given on the device type plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Repairs to power tools may only be
performed by an electrical specialist!
A defective power cord may only be
replaced with a special, original power
cord from Würth which are available
from Würth masterService.
Use only accessories which satisfy the requirements
and technical data specified in this instruction
manual.
Disposal
Do not dispose of this device with
household waste. Dispose of the device
via an approved waste disposal
company or via your local authority
waste disposal facility. Observe the
currently valid regulations. In case of doubt, contact
your waste disposal facility. Dispose of all packag-
ing in an environmentally compatible manner.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales rep-
resentative or an authorised Würth customer service
workshop. Subject to technical changes without prior
notice. We accept no liability for printing errors.
Noise/vibration information
The noise level may exceed 80 dB (A)
during work.
Risk of severe injuries and acoustic
Â
trauma.
Wear hearing protection.
¾
Values measured in accordance with EN 60 745.
Typical measured noise levels (A): Sound pressure
level 85 dB (A); sound power level 96 dB (A).
Measurement uncertainty K=3 dB.
Wear ear protectors!
Vibration total values (vector sum in three directions)
measured in accordance with EN 60 745.
Vibration emissions a=2.5 m/s
K=1.5 m/s
2
The vibration level has been measured with a
standardised measurement method in line with
EN 60745 and can be used to compare power
tools with each other. It is also suitable to assess the
load due to vibration.
The vibration level indicates the values for applica-
tions the power tool is predominantly used for. If
the power tool is used for other purposes, in com-
bination with other tool inserts, the vibration level
can differ. the same applies in case of insufficient
maintenance.
This can increase the vibration load considerably
during the entire working period.
To assess the vibration load precisely, consider also
periods during which the device is switched of or
during which it is switched on but not in use. This can
reduce the vibration load considerably during the
entire working period.
Specify further safety precautions to protect
the operator from the vibration effects, such as:
Power tool and tool insert maintenance, measures to
keep the hands warm and workflow organisation.
WARNING!
. Uncertainty
2
19
Publicidad
