Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the C ock
Setting
the
CJock
The _o_
pad is used to set the chock, The chock may be set for 12 or 24 hour time of day
operation,
The chock has been preset at the factory for the 12 hour operation, When the
range is first pHugged in, or when the power suppHyto the range has been interrupted, the
timer in the dispHay wHH flash with "PF" (power failure, See Figure 1),
.... STO# N
When PF appears in the dispHay, press _CL--'_-R" o sound wHH be heard, but after lO seconds a
beep wHH sounds and PF wHH disappear,
mNSTRUCTmONS
PRESS
To set the cJock (e×amp_e below
for 1:30}:
1,
Press _.
"CLO" wHH appear in the dispHay (Figure 2),
2,
Press
_
_
_
pads
to
set
the
time
of
day
to
1_30
(Figure 3), "CLO" wHH appear in the dispHay, Press (_.
"CLO" wiHH disappear and the chock wiHH start (Figure 4),
Changing
between
12 or 24 hour time of day display:
1,
Press and hoHd_CLOC_ for 6 seconds (Figure 3), WhiHe hoHding
the pad down the current time of day wiHH remain and "CLO" wiHH
disappear from the dispHay (Figure 4), CONTHNUE hoHdingthe
pad untiHa beep is heard,
_foc
6 seconds
2,
The dispHaywiHH show either "12Hr" (Figure 5) or "24Hr" (Figure
6),
3,
Press _._E_
to switch between the 12 and 24 hour time of day
dispHay, The dispHay wiHH show either "12Hr" (Figure 5) or "24Hr"
(Figure6),
STOP
°
.
°
4,
Press
to accept the change or press :CL"E_'R
_0 rejec_ the
change,
;STOP'
Or
CLEA"_B
5,
Reset the correct time as described in To set the CJock above,
PHease note that if the 24 hour time of day mode was chosen,
the chock wiHH now dispHay time from 0:00 through 23:59 hours,
Figure 1
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
....... ii......
17
Publicidad
