Publicidad
Idiomas disponibles
Idiomas disponibles
The foam backing pad with hook and loop
quick fastener (Fig. 4)
Polishing tools 1, e.g. the polishing sponge or
felt disc, are fi xed to the Foam backing pad
3 with the hook and look quick fastener 2, as
shown in Figure 2.
To change the polishing tools, simply pull off
the used polishing tool and press on the desi-
red one.
This makes it easy to change polishing tools
quickly and safely in order to adapt to different
materials or machining stages.
Replacing backing disc (Fig. 5)
Caution!
A worn or damaged backing disc must be re-
placed immediately! Never operate your WP/A
with a defective backing disc or defective poli-
shing tools! Risk of breakage and injuries!
1 x
Foam backing pad
(Article
29
Ø 50 mm)
1 x
Lambskin polishing
disc (Article 28664)
1 x
Polishing
medium hard (yel-
low, article 29094,
Ø 50 x 25 mm)
1 x
Polishing felt, me-
dium hard (article
28666)
12 x
Super-fi ne sanding
discs grain 2000
(article 28670)
A microfi bre cloth is also included with the WP/A for fi nal cleaning of polished surfaces.
Further details with more detailed information can be found either in our device catalogue, in well-
assorted retail stores or on the internet at www.proxxon.com.
- 20 -
With full-surface rigid foam self-adhesive pad.
098,
Of high quality, dense lambskin for polishing scratch-resistant
paintwork. With hook and loop quick fastener Ø 50 mm.
sponge
For applying the polishing emulsion to painted and metal surfaces
followed by gradual polishing. Ø 50 x 25 mm (tapered).
For polishing metals (e.g. stainless steel, brass and copper).
With hook and loop quick fastener
Of silicon carbide. For adding removing varnish runs and
inclusions. With hook and loop quick fastener. Ø 50 mm.
The foam backing pad is pre-assembled on de-
livery of the polisher.
If it needs to be replaced, simply proceed as
follows:
1. Press the lock button 1 carefully.
2. Remove old backing disc and screw on new
backing disc
The foam backing pad is also available as a
spare part under article number 29098. For
Proxxon polishing tools with a diameter of 30
mm, a version with a diameter of 30 mm is
available under article number 29074.
Accessories for the WP/A polisher
The following polishing tools are included with
your WP/A polisher and are also available as
accessories under the indicated part numbers:
Publicidad
