Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions
before starting to use the appliance. Keep
this manual in a safe place for future
reference.
These instructions are also available on
our website. Please visit
www.helenoftroy.com/emea-en/.
• This appliance must only be operated
as instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance.
• Do not touch the rotating fan blades
with any part of the body. This can
cause personal injury and damage.
• Clean the appliance regularly by
following the "Cleaning Instructions".
• This appliance is only designed for
indoor use.
• Unwind the power cord completely.
Failure to do so could cause
overheating and possible fire hazard.
• Do not tug at the power cord to
disconnect the plug. Do not touch the
power cord with wet hands. Do not
remove the power plug from the power
socket while the product is in use.
• Do not use accessories, spare parts
or components not expected and / or
provided by the manufacturer.
• Always switch the appliance off and
disconnect the power plug from the
power socket when the appliance is not
in use or during transport.
• Do not use this appliance if it is
damaged or shows any signs of possible
damage or if it is not functioning
properly. Disconnect the power plug
from the power socket.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Never touch the unit with wet hands.
COMPONENTS
(SEE PAGE 3 & 4)
1. Air Outlet
7. Control Panel
2. Air Inlet
I. On/Off ( )
3. Base
II. Oscillation ( )
4. Power Cord
III. Fan Speed Control ( )
5. Remote Control Holder
IV. Fan Setting Display (Fig. 1)
6. Remote Control
V. Timer ( )
VI. LED Display
FIRST TIME OF USE
Unpack the fan and remove all the packaging materials and dispose of
them for recycling.
ASSEMBLY INSTRUCTIONS
(SEE PAGE 5)
PEDESTAL ASSEMBLY
• Place the power cord in the middle then line up the left and right
pedestal assembly and firmly snap together (Fig. 3).
BASE ASSEMBLY
• Align the two portions of the circular base and snap together by gently
pushing the 4 extrusions into the adjacent circles of the connecting
piece (Fig. 4).
SECURING THE PEDESTAL TO THE BASE
• Align the 3 screw holes on bottom of pedestal with the 3 holes in the
base such that the power cord holder is at the rear of the unit (Fig. 5).
• Secure the base assembly to the pedestal by inserting and tightening
the 3 screws in the 3 holes located on the bottom of the base (Fig. 6).
SECURING THE TOWER FAN TO THE PEDESTAL
• Carefully turn the fan on its side and place on a table. Place the power
cord through the center of the pedestal and base assembly.
• Align the pedestal with the tower fan so that the one locking screw
hole on the pedestal body is aligned with the rear of the tower fan unit.
Firmly hold the base steady and rotate the pedestal assembly clockwise
to lock the tower fan to the pedestal assembly (Fig. 7).
• Secure the pedestal to the tower fan by inserting and tightening 1
screw in the opening located near the top rear of the pedestal assembly.
SECURING THE CORD TO THE BASE
• With the fan still on its side, locate the cord holding bracket on the
bottom of the base.
• Gently pull any slack out of the power cord, place the power cord
6
securely in the holding bracket and secure the power cord bracket over
the power cord (Fig. 8).
• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper, upright
position.
REMOTE CONTROL BATTERY INSTALLATION/
REPLACEMENT INSTRUCTIONS
(SEE PAGE 4)
1. Remove battery door by sliding downward in direction of arrow (Fig. 2).
2. Insert 2 AAA batteries into the remote following the directional guides
in the recessed slots. Batteries are included.
3. Replace battery door by sliding upward until door snaps in place.
INSTRUCTIONS FOR USE
ON/OFF
To turn fan on, press the Power button ( ).
SPEED CONTROL
The fan will automatically start on "1" speed when initially turned on. To
adjust the speed up or down, press the Fan Speed button ( ) repeatedly
to increase level.
OSCILLATION
To activate the Oscillation feature, press the Oscillation button ( ) once.
Press the Oscillation button again to turn the Oscillation feature off.
TIMER
Choose from 1, 2, 4, or 8 hour settings by performing the following
function:
• 1 hour: Press the Timer button ( ) once.
• 2 hours: Press the Timer button twice.
• 4 hours: Press the Timer button a third time.
• 8 hours: Press the Timer button a fourth time.
Press the Timer button a fifth time to turn the Timer feature off.
REMOTE CONTROL STORAGE
(SEE PAGE 3)
The remote control may be stored in the recessed area located behind the
controls when it is not in use.
CLEANING, STORAGE AND DISPOSAL
CLEANING
1. Switch the appliance off and remove the power plug from the socket.
2. Clean the outer surfaces of the appliance with a soft, damp cloth. Do
not use petroleum, thinners or any other chemicals. Use your vacuum
cleaner with the brush attachment to clean the grids.
3. Do not plunge the appliance into water or any other liquids and do not
pour water or any other liquids over the appliance.
STORAGE
1. If you do not wish to use the appliance for a longer period, clean it as
described above.
2. Store the appliance in a cool, dry location. Cover it up to protect it from
dust.
ENGLISH
DISPOSAL
Only discard empty batteries. They should not be disposed of
in the household waste, but at appropriate collection sites or at
your retailer.
Please do not dispose of this product in the household waste at
the end of its useful life. Disposal can take place at your local
retailer or at appropriate collection points provided.
GUARANTEE
Please read all instructions before attempting to use this device. Please
retain the receipt as proof of and date of purchase. The receipt must be
presented when making any claim within the relevant guarantee period.
Any claim under the guarantee will not be valid without a proof of purchase.
Your device is guaranteed for three Years (3 Years) from date of purchase.
This guarantee covers defects in materials or workmanship that occur
under normal use; defective devices meeting these criteria will be replaced
free of charge.
The guarantee DOES NOT cover defects or damage resulting from abuse
or failure to follow the user instructions. The guarantee becomes void if the
device is opened, tampered with or used with other parts or accessories, or
if repairs are undertaken by unauthorised persons.
Accessories and consumables are excluded from any warranty.
For support requests, please visit www.hot-europe.com/support or find
service contact information at the end of this owner's manual.
This Guarantee is applicable to Europe, Russia, Middle East and Africa only.
UK Only: This does not affect your consumer statutory rights.
The LOT and SN of your device are printed on the rating label on the
packaging of the product.
NOTE: IN THE UNLIKELY EVENT YOU EXPERIENCE A PROBLEM WITH
THIS PRODUCT PLEASE FOLLOW WARRANTY INSTRUCTIONS. PLEASE
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. DOING SO
WILL VOID THE WARRANTY AND COULD CAUSE PROPERTY DAMAGES
OR PERSONAL INJURY.
This product carries the CE mark and is manufactured in conformity with
the Electromagnetic Directive 2014/30/EU, the Low Voltage Directive
2014/35/EU, the RoHS Directive 2011/65/EU and the Energy Using
Products Directive 2009/125/EC
Technical modifications reserved.
HY254E
220–240 V~50Hz
35W
7
Publicidad
