Publicidad
Idiomas disponibles
Idiomas disponibles
d) Under abusive conditions, liquid may
be ejected from the battery; avoid con-
tact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries may exhibit unpre-
dictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to
fire or excessive temperature. Expo-
sure to fire or temperature above
130 °C may cause explosion.
Special safety instructions.
Safety warnings for core drills.
When performing drilling that requires the
use of water, route the water away from the
operator's work area or use a liquid collec-
tion device. Such precautionary measures
keep the operator's work area dry and
reduce the risk of electrical shock.
Operate power tool by the insulated grasp-
ing surfaces when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
Wear hearing protection when drilling.
Exposure to noise can cause hearing loss.
When the bit is jammed, stop applying
downward pressure and turn off the tool.
Investigate and take corrective actions to
eliminate the cause of the bit jamming.
When restarting a drill in the workpiece,
check that the bit rotates freely before start-
ing. If the bit is jammed, it may not start, may
overload the tool, or may cause the drill to
release from the workpiece.
When securing the drill stand with anchors
and fasteners to the workpiece, ensure that
the anchoring used is capable of holding and
restraining the machine during
g) Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range speci-
fied in the instructions. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
use. If the workpiece is weak or porous, the
anchor may pull out causing the drill stand to
release from the workpiece.
Ensure there is sufficient vacuum before and
during drilling. If the vacuum is insufficient,
the pad may release from the workpiece.
When drilling through walls or ceilings,
ensure to protect persons and the work area
on the other side. The bit may extend
through the hole or the core may fall out on
the other side.
Do not use this tool for overhead drilling
with water supply. Water entering the
power tool will increase the risk of electric
shock.
Special safety instructions.
Do not use a damaged power tool. Before
each use of the power tool, check the hous-
ing and other components for damage such
as cracks or breakage.
Wear protective equipment. Depending on
the application, wear face shield or safety
goggles. Wear hearing protection. The
safety glasses/goggles must be suitable to
protect against the particles emitted from
different operations. Continuous high expo-
sure to noise can lead to loss of hearing.
Do not touch the sharp edges of the core drill
bit. Danger of injury.
en
5
Publicidad
