Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Height adjustment
Press
or
to adjust the height. The LED display shows the current height
(in cm).
Memory function
a) Press
or
to set the desired height. Once this is reached, press the
memory button M and the LED display shows 5-. Now press one of the keys
for memory location 1, 2 or 3 and save the desired height there. Depending on
which location you select 5-1, 5-2 or 5-3 appears - this completes the saving
process.
b) Now press and hold one of the memory keys and the desk display automati-
cally adjusts to the stored height. The buttons must be pressed continuously
during the journey.
Note: This is a safety requirement in accordance with the Machinery Directi-
ve, with which height-adjustable systems must be equipped with to protect
against injuries and damage.
Alarm function
a) Press the Alarm button A to activate the function. The LED display shows
ON, within two seconds press the keys
or
and set the timer. The default
setting is a reminder after 45 minutes and is shown in the LED display as C45.
Once the desired time is set, don't touch the control panel for 5 seconds. This
activates the alarm function.
b) As soon as the time has expired, the LED display shows C00 and a 10-se-
cond tone sounds.
c) If you want to reactivate the alarm for the same period of time press any key
during the 10-second tone. If you do not press any key during the alarm, the
alarm sounds again after 5 minutes. If during the second alarm again no input
is made via the control panel, the alarm function disables automatically.
d) If you adjust the height of the table during the signal, the timer is restarted.
e) If you want to switch off the alarm clock function, press button A for three
seconds. The LED display then shows OFF and the function is deactivated.
7
Publicidad
