Publicidad
Idiomas disponibles
Idiomas disponibles
Light
Color
Power
Green
Alarm
Red
Sensor
Yellow
Display description
Figure 9
shows the information shown on the display.
When a calibration error or Flow alarm occurs, an error message shows on the display. Refer to
Error messages
on page 22.
Figure 9 Counting screen
1 Particle size monitored on Channel 2
2 Particle size monitored on Channel 1
3 Particle count on Channel 1
Operation
Configure the particle counter
The particle counter can be configured for stand alone or network operation. In network mode, the
data buffering, printing and the Channel 2 Size settings are changed with the network software so
these settings are not available on the instrument display.
1. Push the F1 to select an option, then push ENTER. The current setting(s) shows.
16 English
Table 7 Indicator light descriptions
Description
There is power to the instrument and the power switch is on.
Steady on—a network alarm is active.
Flashes—a Count alarm or a Flow alarm is active.
Refer to
Troubleshooting
Steady on—a high calibration error is active.
Flashes—a low calibration error is active.
Refer to
Troubleshooting
on page 22.
on page 22.
4 Particle count on Channel 2
5 F1 and F2 soft key functions
Publicidad
