Displaying The "Mixtrax Settings" Screen; System Settings; Displaying The "System" Setting Screen; Setting The Steering Wheel Control - Pioneer AVH-X8850BT Manual De Instrucciones

MIXTRAX
Displaying the "MIXTRAX
Settings" screen
1 Display the "System" setting screen.
2 Touch [AV Source Settings].
3 Touch [MIXTRAX Settings].
Setting the flash pattern
The flashing colour changes with the changes in the sound and
bass levels.
The default setting is "Sound1".
1 Display the "MIXTRAX Settings" screen.
 Refer to Displaying the "MIXTRAX Settings" screen on page
38
2 Touch [Flash Pattern].
3 Touch the item.

Sound1 to Sound6:
The flash pattern changes according to the sound level.
 L-Pass1 to L-Pass6:
The flash pattern changes according to the bass level.

Random1:
The flash pattern changes randomly according to the sound
level mode and low pass mode.
 Random2:
The flash pattern changes randomly according to the sound
level mode.

Random3:
The flash pattern changes randomly according to the low
pass mode.
 Off:
The flash pattern does not flash.
38

System settings

Displaying the "System" set-
ting screen
1 Press the button.
2 Touch , and then .
Setting the steering wheel
control
You can set the steering wheel control on the display via a wired
remote cable.
 Refer to Power cord on page 51
This setting is required for using the steering wheel remote
control function.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p This setting is available when turn all the sources off.
p You can set only one function key to a steering wheel key.
p If this function does not work correctly, contact your dealer
or an authorised Pioneer Service Station.
p When you start to set, all the default key settings is automati-
cally cleared.
For steering wheel control adapter
for Pioneer users
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Steering Wheel Control].
3 Touch [With Adapter].
4 Touch [OK].
Registering function to each key
manually
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Steering Wheel Control].
3 Touch [W/o Adapter].
4 Touch the item to select the brand of your
vehicle.
5 Touch the item to set.
Follow the on-screen instructions to register the function setting.
 If you touch [Clear], all the settings is cleared.
Setting Bluetooth audio source
activation
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On" or
"Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Ever Scroll] to switch "On" or "Off".

Setting the beep tone

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
38
2 Touch [Beep Tone] to switch "On" or "Off".

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required
for utilising the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the gearstick is in the REVERSE (R) position.