Publicidad
Idiomas disponibles
Idiomas disponibles
1. Power/Mode Button
Press this button to start up and
shut down your evaporative cooler.
•
After the cooler is plugged in, the
control will automatically go into
Standby Mode.
•
To
turn
on
the
cooler, press the power/mode
button. The cooler will start
circulating water to pre-soak the
media for optimal cooling. The
fan will run at low speed during
the pre-soak process until the
cycle is complete. Once the pre-
soak cycle is done, the fan and
cooling modes will automatically
return to their previous settings.
Note: Pressing the fan speed buttons
will exit the evaporative cooler from
pre-soak mode.
•
Press the power/mode button
once
evaporative cooler. If the media is
wet, the cooler will automatically
dry it, and the shutdown timer will
begin. Once the timer is complete,
the cooler will return to Standby
Mode. If the water system is
not running, the cooler will go
evaporative
directly to Standby Mode without
following
Note:
media drying, press the power/
mode button again to go directly to
standby mode.
•
Press
mode button for 3 seconds to
turn off the evaporative cooler
and control panel. Once turned
off, the LED will also turn off.
Note: when in OFF mode, the cooler
cannot be directly controlled from the app
and will not run previously configured
schedules unit it is returned to standby.
DISPLAY FUNCTIONS
to
shut
down
your
the
drying
process.
to
bypass
the
automatic
and
hold
the
power/
2. Fan Speed Buttons
Press the +/- buttons to increase or
decrease the fan's speed.
•
There are five fan speeds, and
the blue light bars indicate the
current speed setting.
3. Cooling Mode Button
Press to manually turn the water
system on and off or to change the
cooling mode.
•
Pressing the cooling button once
will turn on cooling to the previous
mode. Use the < > arrows in the
menu to change the mode on the
LCD screen if desired. Note: it is
unnecessary to toggle the cooling
mode button once it's set to your
preference.
•
There are three cooling modes:
◦ Max cooling (recommended)
13
Publicidad
