Electrolux ENP7MD19S Manual De Instrucciones página 43

1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
and
see
5. DAILY USE
5.1 Positioning door shelves
The door of this appliance is equipped
with runners that enable shelves/bins to
be arranged according to individual
preferences.
To reposition the door shelves/bins:
1. Gradually lift the shelf/bin in the
direction of the arrows until it comes
free.
2. Place the shelf/bin in desired position
and gently insert it into the runner.
5.2 Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the
shelves can be positioned as desired.
This appliance is also equipped with a
shelf consisting of two parts. The front
half of the shelf can be placed under the
second half to make better use of space.
To fold the shelf:
1. Take out the front half gently.
2. Slide it into the lower rail and under
the second half.
repeatedly until you see
. Tap repeatedly until you
.
1
2
into solid
.
factory settings are restored.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
1
5.3 GreenZone drawer
There is a pull-out drawer in the bottom
part of the refrigerator compartment.
The glass shelf of the GreenZone is fitted
with a device that regulates its sealing
and provides for optimal humidity inside
the drawer.
5.4 Removing GreenZone
drawer
To remove the drawer:
turns into blinking
, which indicates that
1
2
Do not move the glass shelf
above the vegetable drawer
to ensure correct air
circulation.
It is recommended to empty
the drawer before removing
it from the refrigerator.
ENGLISH 43
and then