Setting The Grinding Fineness; Inserting The Filter; Setting The Coffee Strength - Beem Fresh-Aroma-Perfect II Manual De Instrucciones

25

Setting the Grinding Fineness

Move the dial for the grinding fi neness (8) to the position you want (fi ne – medium – coarse)
(Picture A).
When you switch to another grinding strength, there will still be coffee powder with the
previous grinding strength in the grinder shaft. The grinder shaft may need to be cleaned
beforehand (see the "Cleaning and Care" chapter – "Cleaning the Grinder Shaft").

Inserting the Filter

1. Open the fi lter compartment (5).
2. Insert the fi lter insert into the fi lter compartment.
3. Insert the permanent fi lter into the fi lter insert (Picture B).
4. Close the fi lter compartment again. It must engage.
Setting the Number of Cups
Keep pressing the
The selected number of cups is saved until a new number of cups is set or the device has
been disconnected from the power supply.

Setting the Coffee Strength

The coffee strength can be set when making coffee with coffee beans. To do this, keep pressing
the button (20) until the coffee strength (14) you want is shown on the display (7).
Mild coffee
Medium coffee
Strong coffee
The selected coffee strength is saved until a new coffee strength is set or the device has
been disconnected from the power supply.
Aroma Plus Function
The brewing time can be extended with the aroma plus function. The extended brewing time
will give your coffee a more intense aroma.
1. First select the number of cups you want and the coffee strength (see previous sections).
We recommend that you only use the fl avour function for 2 or 4 cups. This is because
the brewing time for 6, 8 or 10 cups is long by default. An even longer brewing time
could make the coffee too bitter.
2. Press the
Please Note! The aroma plus function switches off automatically after each brewing pro-
cess.
03958_DE-EN-FR-ES-IT_A5_V2.indb 25 03958_DE-EN-FR-ES-IT_A5_V2.indb 25
button (26) until the display (7) shows the number of cups you want (12).
button (20) for at least 2 seconds until the display (7) shows
EN
(13).
06.08.2020 09:48:49 06.08.2020 09:48:49