Bosch UniversalMulti 18V-32 Manual Original página 17

Clean the air vents on your power tool regularly. The
u
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
When changing the application tool, wear protective
u
gloves. Application tools can become hot when used for
prolonged periods of time.
Do not treat the surface you will be working on with
u
any fluids that contain solvents. Poisonous vapours
may develop due to the materials heating up when being
scraped.
Take particular care when handling scrapers and
u
blades. The accessories are very sharp. Danger of injury.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Keep the magnet away from implants and
other medical devices, e.g. pacemakers or
insulin pumps. The magnet generates a field
that can impair the function of implants and
medical devices.
Keep the power tool away from magnetic data carriers
u
and magnetically sensitive equipment. The effect of
the magnet can lead to irreversible data loss.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. nails, clamps). It is also suit-
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Battery charge indicator
(3) Hex key storage
(4) Battery release button
(5) Rechargeable battery
(6) Orbital stroke rate preselection thumbwheel
(7) Ventilation slots
(8) Thread for auxiliary handle
(9) Tool holder
(10) Magnet
(11) Plunge cut saw blade
a)
(12) Sanding plate
a)
(13) Sanding sheet
a)
(14) Segment saw blade
(15) Handle (insulated gripping surface)
(16) Clamping bolt
(17) Hex key
a)
(18) Depth stop
a)
(19) Extraction hose
(20) Dust extraction adapter
a)
(21) Extraction outlet
a)
(22) Dust extraction
(23) Clamping lever for dust extraction system
(24) Auxiliary handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless multifunction tool
Article number
Orbital stroke rate
preselection
Constant electronic con-
trol
Soft start
English | 17
a)
a)
a)
a)
a)
a)
UniversalMulti 18V-32
3 603 A05 0..
1 609 92A 87V | (07.12.2023)
●
●
●