Attaching the Armrests
1. Insert the armrests into
the seat.
2. Push the armrest
forward until it clicks
3. Insert the attachment
screw into the hole and use
• Marks indicating left and right can
be found on the underside of each
armrest.
into position.
the Allen key to secure it.
(Repeat the procedure for the armrest
on the other side.)
Attaching the Control Panel Stand
Secure the control panel stand to the right hand side of the unit using the three
screws provided.
Attaching and Removing the Control Panel
When attaching the
control panel, slide
it in from the top.
Control
Panel Stand
Slide the control panel
up to remove it.
• Loosen the screw to situate the
control panel stand at the
desired angle, then tighten
screw again. For smooth
removal of the control
panel, press on the back
of the unit while sliding up.
Screw
6