Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OVERVIEW
The rotary hammer is a versatile portable tool that does not require an external power source and is designed for DIY enthusiasts
to drill holes in a variety of materials (e.g. wood and wood-based materials, metals), as well as in hard ceramic materials (e.g.
concrete) thanks to the hammer drilling function. Its specifi c advantages will be appreciated by DIY enthusiasts performing various
assembly and fi nishing works. The product is not designed for commercial use. Proper, reliable and safe operation of the power
tool depends on appropriate use, that is why you should:
Read the entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
specifi ed in this instructions manual.
EQUIPMENT
The product is delivered complete but requires certain preliminary assembly actions described in further sections of the manual.
The product is supplied without a battery and charging station.
TECHNICAL DATA
Parameter
Catalogue No.
Operating voltage
Revolutions (idle speed)
Impact frequency
Impact energy
Noise level
- sound pressure L
± K
pA
pA
- sound power L
± K
wA
wA
Protection rating
Insulation class
Vibration level a
± K
h
Weight
Tool chuck
Max. drilling diameter
- in wood
- in concrete
- in steel
Battery type
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of use
(including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
O R I G I N A L
EN
Unit
[V]
[min
]
-1
[min
-1
]
[J]
[dB]
[dB]
[m/s
]
2
[kg]
[mm]
[mm]
[mm]
I N S T R U C T I O N S
Value
79107
20 DC
0 – 900
0 – 5000
1.1
88.0 ± 3.0
99.0 ± 3.0
IPX0
III
8.9 ± 1.5
1.22
SDS Plus
16
10
8
Li-Ion
11
Publicidad
