Publicidad
Idiomas disponibles
Idiomas disponibles
IF SOMEONE COMES
1. Protect yourself from dangerous situations at
all times. Warn adults to keep pets and children
out of the area. Be careful if someone approaches
you. Debris floating in the air can cause injury.
2. If someone calls or interrupts you during work,
always make sure to turn off the machine before
turning around.
MAINTENANCE
1. To keep your product in perfect operating con-
dition, perform the maintenance and inspection
operations described in the manual at regular
intervals.
2. Be sure to always shut off the engine before
performing any maintenance, checking procedu-
res, or handling the machine.
WARNING
Metal parts reach high temperatures imme-
diately after stopping the engine.
3. When you replace the cutting attachment or
any other part or when you replace the oil or any
lubricant, always make sure it is genuine repla-
cement.
4. In the event that any part needs to be replaced
or any repair or maintenance work not described
in this manual needs to be performed, please
contact your nearest YAROS Authorized Service
Representative for assistance.
5. Do not use any accessories that are not YAROS
branded and recommended for this unit.
6. Under no circumstances should you disassem-
ble the product or alter it in any way. Otherwise,
the product may be damaged during operation or
may not function properly.
FUEL MANAGEMENT
1. The engine of the YAROS product is designed
to run on blended fuel containing highly flam-
mable gasoline. Never store fuel cans or fill the
unit's tank anywhere where there is a burner,
oven, milk fire, electrical sparks, welding sparks,
or any other source of heat or fire that could ig-
nite fuel.
2. Never smoke while using the unit or while fi-
lling the tank.
3. When filling the tank, always turn off the engi-
ne and let it cool down. Take a close look to make
sure there are no sparks or open flames anywhere
nearby before refueling.
4. Wipe up spilled fuel completely with a dry rag if
fuel is spilled during refueling.
5. After refueling, screw the fuel cap back on the
fuel tank firmly, and then drive the unit at least
3m or more away from where you refueled before
starting the engine.
6. Do not inhale combustible fumes; they are
toxic.
TRANSPORT
1. When carrying the product, cover the cutting
part if necessary, lift the product and carefully
transfer it from the blade.
2. Never transport the product over bumpy roads
for long distances in a vehicle without removing
all the fuel from the tank. Otherwise, fuel may
leak from the tank during transportation.
7
EN
Publicidad
