Xylem SI Analytics AVS 370 Manual De Instrucciones página 28

28
Data transfer parameters:
Data interface:
Data format:
Connections Back panel of the
Data in- and output:
Spill-over guard VZ 8551
Bath backlighting:
Pump connector:
Mains connector:
To be connected to the front panel of ViscoPump III
Pneumatic connectors:
Capacitive sensor:
ViscoPump III module:
Power supply:
Casing:
Dimensions:
Weight:
Ambient conditions:
Climate:
Pollution degree:
bidirectional, serial interface interface according to EIA RS-232-C
word length 7 bits, 2 stop bits, 4800 baud, no parity
device:
2 serial RS-232-C interfaces: 9-channel sub-miniature D sockets
1 serial interface: Connection of a personal computer (PC)
st
2 serial interface: Connection of a
nd
for waste bottle:
DIN round plug connector 4 channels with screw-type cap according to DIN 45321
Circula connectors with bayonet lock DIN 4 pin, 24 V, 350 mA
Cold-device socket in accordance with EN 60320 for connecting a 230 V or
115 V vacuum pump. The nominal voltage of the vacuum pump has to match the nominal
operating voltage of the
Max. power consumption required for the operation of the pump 2.5
Max. performance with 115 V: 285 VA
Max. performance with 230 V: 575 VA
Device plug with safety interrupter according to VDE 0625, IEC 320/C14,
EN 60320/C14, DIN 49 457 B
Aerate pressure/suction to be connected to viscometer.
Overflow protection for suction hose VZ 8552
DIN round-plug connector, 4-channel (ViscoPump III module)
Screwed cap according to DIN 45321
for viscometer: Round-plug connector with bayonet catch, DIN 5 channels
®
for AVS /S (measurement stand), 5-channel socket or
for TC viscometer, 4-channel DIN socket
Corresponds to Protection Class 1 according to DIN 57 411, Part 1 / VDE 0411, Part 1
Mains connection:
Mains fuse:
Power consumption:
Steel/aluminium casing with chemically resistant two-component coating, stackable
approx. 255 x 204 x 320 mm (W x H x D)
approx. 5.34 kg with 1 ViscoPump III module
approx. 7.67 kg with 4 ViscoPump III modules
Do not use the device in hazardous locations!
Ambient temperature: + 10 ... + 40 °C for operation and storage
Humidity according to EN 61 010, Part 1:
Max. relative humidity 80 % for temperatures up to 31 °C,
linear decrease down to 50 % relative humidity at a temperature of 40 °C
Pollution degree IP 20, indoor use only.
®
TITRONIC
®
AVS 370.
modules:
100 - 240 V, 50 ... 60 Hz
Fine-wire fuse 5 x 20 mm, 250 V~, 4 A, time-lag design
100 VA (without connection of a 115 V / 230 V vacuum
®
, or a 2 AVS 370
nd
A
pump)