Basic Band Saw Operation - Skil 3385 Instrucciones De Funcionamiento Y Seguridad

SM 2610957105 05-08 5/6/08
ON/OFF switch (Fig. 22)
1. To turn the saw ON, move the switch (1) to the up
(ON) position.
2. To turn the saw OFF, move the switch to the down
(OFF) position.
3. To lock the switch in the OFF position:
a. Wait until the band saw has come to a complete stop.
b. Remove the safety key (2) from the switch housing.
Store the safety key in a safe place.
4. To unlock the switch and turn the saw ON, insert the
safety key into the switch, and move the switch to the
ON position.
LED work lamp (Figs. 22 and 23)
The LED work lamp (6) has an adjustable gooseneck
for precision control when aiming the
light. The work lamp switch (4) is independent and may
be turned ON or OFF separately from
the band saw switch.
Laser line (Figs. 22 and 23)
1. Set the workpiece in place on the table.
2. Turn ON the laser light switch (3).
3. Rotate the laser line adjustment knob (7) to move the
laser line to the desired position on the workpiece.
3:00 PM Page 15
Operation
FIG. 22
2
FIG. 23
15.
5
3
1
4
6
7