Unpacking And Checking Contents; Table Of Loose Parts - Skil 3385 Instrucciones De Funcionamiento Y Seguridad

SM 2610957105 05-08 5/6/08
To reduce the risk of injury, never
!
WARNING
connect plug to power source outlet
until all assembly steps are complete and until you
have read and understood the entire owner's
manual.
Model 3385-01 Motorized Band Saw is shipped
complete in one box.
1. Unpacking and Checking Contents, separate all parts
from packing materials. Check each one with the "Table
of Loose Parts" to make sure all items are accounted for
before discarding any packing material.
If any parts are missing, do not at-
!
WARNING
tempt to assemble the band saw, plug
in power cord or turn the switch on until the
missing parts are obtained and are installed
correctly.
2. Remove the protective oil that is applied to table and
base. Use any ordinary household type grease and spot
remover.
To avoid fire or toxic reaction, never
!
WARNING
use gasoline, naptha or similar highly
volatile solvents.
3. Apply a coat of paste wax to the table and machined
surfaces of base to prevent rust. Wipe all parts
thoroughly with a clean dry cloth.

Table of Loose Parts

ITEM DESCRIPTION
A Band Saw
B Table
C Table insert
D Fence
E Miter gauge assembly
F 3 mm allen wrench
G 10 and 13 mm combination wrench
H Table bolt, washer, lock washer
I Operating Guide
I
3:00 PM Page 7

Unpacking and Checking Contents

QTY.
A
1
1
H
1
1
1
1
1
4
1
G
7.
B
C
D
E
F