Fellowes Array AR2 Guía Para La Instalación página 5

FILTER INSTALLATION PROCEDURE
Unit will notify you when filter needs to be changed with a red led visible on the bottom of the unit.
For replacement filters, please visit: www.fellowes.com
1
Open the door by depressing the latch button and
pulling down on the door.
4
Secure filter into place by moving filter clamp lever
back into the locked position until a click is heard.
NOTE: Locking/unlocking motions are in opposite
directions between left and right filter changing
mechanisms.
2
Remove new filter from protective bag and
properly dispose of bag.
Holding the filter by the strap, align support cleat
with slot.
5
Close door until a click is heard. After closing
door, press door closed on corners and directly
beneath latch to ensure magnets and latch are
fully secured.
3
Gently push in filter until a click is heard.
NOTE: if top and bottom supports are not properly
aligned, the filter will not sit properly and can
damage the unit.
5