Kobalt 54558 Manual De Instrucciones página 2

PACKAGE CONTENTS
A
ON
E
PART DESCRIPTION
A Rechargeable 2-in-1 laser level with stud finder
B Wall mount bracket
C Bracket accessory
D Reusable double sided mounting gel pad
E Push pins
F Type-C cable wire
B
D
C
F
QUANTITY
1
1
1
1
2
1
3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
• Working safely with the electronical tool is possible only when the operating and safety information
are read completely and instructions contained herein are strictly followed.
• Never make warning labels on the measuring tool unrecognizable. Save these instructions.
WARNING
• LASER RADIATION. Do not stare into beam. Class II laser product. Turn the laser beam on only
when using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure. The laser beam can cause persons being blinded.
• Do not operate the tool around children or allow children to operate the tool.
• Do not place the tool in a position that may cause anyone to stare at the laser beam, whether
intentionally or unintentionally.
• Do not use on reflecting surfaces such as sheet steel, glass or polished metal etc. that have shiny,
reflective surfaces. The shiny surface could reflect the beam back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool on increases the risk of someone
inadvertently staring into the laser beam
• Do not attempt to modify the performance of this laser device in any way. This may result in a
dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the laser-measuring tool. If unqualified persons attempt to
repair this product, serious injury may occur. Any repair required on this laser product should be
performed only by qualified service personnel.
• Use of other accessories that have been designed for use with other laser tools could result in serious
injury.
• Do not operate the tool outdoors.
• Do not place or store tool under extreme temperature conditions.
• Do not operate the tool in explosive environments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the tool which may ignite the dust or fumes.
• Keep the tool away from cardiac pacemakers. The magnet inside the tool generates a field that can
impair the function of cardiac pacemakers.
• Keep the tool away from magnetic data medium and magnetically-sensitive equipment. The effect of
the magnetic can lead to irreversible data loss.
• Measurement may not be accurate if used beyond the rated range of the device.
• The use of optical instruments with this product will increase eye hazard.
• Always make sure any bystanders nearby aware of the dangers of looking directly into the measuring
tool.
• Do not use the laser viewing glasses as safety goggles, they do not protect eyes against laser
radiation.
CAUTION
• The use of operating or adjusting equipment or the application or processing methods other than
those mentioned herein, can lead to hazardous radiation exposure.
• Material thickness, type of material, moisture content, and other variables can affect sensing results.
• The sensor may detect electric wiring or pipes in the same manner that studs are detected depending
on their location to the wall surface,Use caution when drilling, nailing or cutting into walls, floors and
ceilings which may contain electrical wiring or pipes.
• Always turn off the power when working near electrical wires, electric shock may result.
4