GB
8.2
Cleaning the appliance and mower
mechanism (12)
IMPORTANT! Danger from water. Water in
the appliance causes short-circuits and destroys
electrical components.
■
Do not spray the appliance with water.
■
Only use a broom or a brush for cleaning.
1. Switch off the appliance.
2. Pull out the battery.
3. Tilt the appliance to one side and clean mow-
er mechanism (12/1) using the scraper
(12/2).
8.3
Checking and renewing the cutting
blade
WARNING! Severe injuries due to blade
parts being flung out. A worn, cracked or dam-
aged cutting blade can break, and its parts can
become dangerous projectiles.
■
Regularly check the cutting blade for dam-
age.
■
Do not use the lawnmower if the cutting
blade is worn or damaged.
■
Have blunt or damaged cutting blades sharp-
ened or replaced only by one of the manufac-
turer's service centres or an authorised spe-
cialist company.
■
To avoid vibrations, the cutting blade and
blade bolt must always be replaced together.
Malfunction
Motor does not
start.
Engine loses power. Battery is flat.
Motor stops during
mowing.
32
Cause
Power supply is switched off.
Battery missing or not seated
correctly.
Battery is flat.
Cutting blade is blocked.
Switches are defective.
Cutting blade is blunt.
Cutting blade is blunt.
■
Resharpened cutting blades must be bal-
anced. Unbalanced cutting blades cause
strong vibrations and damage the appliance.
8.4
Repair work
WARNING! Risk of injury during repair
work. Improper repairs can lead to serious inju-
ries and damage to the appliance.
■
Have repair work performed by the manufac-
turer's service centres and authorised spe-
cialist companies only!
In the following cases, contact one of the manu-
facturer's service centres:
■
Motor no longer starts.
■
Appliance has run onto an obstacle.
■
Cutting blade and/or motor shaft are bent.
■
Appliance vibrates and does not run smooth-
ly.
■
Battery has leaked or is damaged.
9 HELP IN CASE OF MALFUNCTION
CAUTION! Risk of injury. Sharp-edged
and moving appliance parts can lead to injury.
■
Always wear protective gloves during mainte-
nance, care and cleaning work!
NOTE For malfunctions that are not listed in
this table or that you cannot resolve yourself,
please contact our customer service.
Remedy
Switch on the power supply.
Install the battery correctly.
Charge the battery.
■
Free the blade of obstructions.
■
Start the appliance on short grass.
Do not operate the appliance! Contact one
of the manufacturer's service centres.
Charge the battery.
Have the cutting blade sharpened at one of
the manufacturer's service centres.
Have the cutting blade sharpened at one of
the manufacturer's service centres.
Help in case of malfunction
22.4 Li comfort