Brandt BFL8631EW Manual De Instrucciones página 39

5.Remove the door cover. Fit the door bushing and signal line on the opposite side and
replace the door cover. Remove the stop and bushing from the bottom right-hand side of
the door and install them on the left-hand side.
Cover door signal line
Socket
5)
Stop
sleeve
Stop screw
5)
6.Remove the left upper hinge and its cover from the accessory bag, place the door on the
lower hinge and fit the upper hinge. Connect signal line terminal 3 m to terminal 2, terminal
1 m to terminal 4, and finally fit the top hinge covers.