Publicidad
Idiomas disponibles
Idiomas disponibles
TRANSPORT AND STORAGE
Transport
Note: Do not kink any Bowden cables!
• Switch off sweeper and pull out the ignition key.
• Fold the side brushes upwards
• Fasten the wheels of the machine with chocks.
• Fasten the machine with tensioning belts or ropes.
• While transporting in vehicles or trailers, the machine has to be secured,
according to the relevant applicable guidelines, against sliding and tipping.
• Two fastening areas for belts:
a) Machine vertically fastened (fastened to the floor as illustrated)
b) Machine horizontally fastened (fastened to the wall as illustrated)
Storage:
Note: If it is stopped for a long period, the battery must charge at intervals of
approximately 2 months so this is not damaged by a deep discharge.
• Set down the sweeper onto a level, dry and protected surface.
• Put ignition key into the " 0 " position and remove key.
• Secure sweeper against rolling away.
• Raise sweeping roller. To do this, adjust the level to the lowest position and
stop.
• Raise the side brushes.
• Clean the dust filter.
• Empty the refuse container.
• Clean the sweeper inside and out.
• Disconnect the battery.
After the useful life of the machine is over, it must be disposed of expertly. However,
individual parts may be thoroughly reused.
For the disposal of all equipment parts, the disposal conditions specific for the
location are applicable.
Note: Please ask your supplier about disposal of the equipment.
DANGER! Risk of crushing! Observe the weight of the
machine!
30
Publicidad
