Torin BIG RED T830026XHB Manual Del Propietário página 3

ASSEMBLY
1. Familiarize yourself with the jack.
Lifting Arm
Pump Plunger
2. Prior to assembly, carefully remove the retaining
clip attached to the handle socket. CAUTION: The
socket will tend to spring upward when the clip
is removed. To prevent possible injury, place one
hand on the top of handle socket to control the
upward motion of the handle socket retaining clip,
and then carefully remove the retaining clip. After
removed slowly allow handle socket to rise back
into resting position.
WARNING!
Once retaining clip is removed, SLOWLY allow
handle socket to rise back into resting position.
Use CAUTION when removing retaining clip,
handle socket will spring forward rapidly.
Saddle
Front Wheel
Handle
Rear Swivel
Casters
Clip
3. Securely fasten the SUV height adaptor to the
cover plate with the long saddle pin. Use the Allen
wrench provided to secure the pin. (Firmly tighten
to secure the height adaptor during movement.)
4. To switch between low profile to SUV height:
a. Unscrew the short and long saddle pins and
remove the saddle.
b. Securely fasten the flat saddle and the SUV
height adaptor to the jack saddle bracket plate
with the long saddle pin. Securely fasten the short
saddle pin to the cover plate.
Note: Use the Allen wrench provided to secure pins.
(Firmly tighten each position to secure the SUV
height adaptor during movement.)
5. Switch from SUV height to low profile:
a. Unscrew the short and long saddle pins and
remove the saddle.
3