Be Cool BC18AC2301IKF Instrucciones De Uso página 180

•
Press the "
(SPECIAL) ANION / INSECT REPELLENT FUNCTION
•
Use the "
indicator lights up.
•
The unit now starts to distribute ionised air into the room. The atoms
and molecules created serve to eliminate odours and disinfect the air.
•
Also use the "
respective indicator lights up.
•
The device emits ultrasonic waves that repel mosquitoes and other
flying insects.
•
Press the
COOLING MODE
Use the "COOL" button to start the COOL MODE function ➔ the
•
respective indicator lights up.
•
The unit now starts pumping water out of the water tank to create cold air,
which is then blown out of the unit. The colder the water in the tank, the
colder the air that flows out of the unit.
Make absolutely sure that the water level indicator is above the MIN.
If the speed is set to MID, HIGH or TURBO when Cooling mode is
activated, the fan runs on LOW for 30 seconds and then continues
" button again to switch off the humidity control.
" key to start the "IONEN" function ➔ the respective
" key to start the "MOSQUITO" function ➔ the
button again to deactivate the function.
operation at the previously set speed level.
NOTE
180