The pump does not
work and does not
deliver
Cooling
The pump works,
but does not
circulate water, or
the cooling pads
contain too little
water
Water spits out of
the appliance
Unwanted odour
Relative humidity too
high
Damaged pump
Loose pump motor
connection
Clogged upper water
distribution tray
Loose or poor pump
motor connection
Cooling pads remain out
of position
Clogged upper water
distribution tray
The unit is located in a
Area in which
undesirable
Odours are present or
185
When the evaporative
cooler is used for a long
period of time, the room
humidity is very high, so
the evaporative cooler
cannot lower the
temperature as much as
when the humidity in the
room is lower. Turn the
cooling mode off
Repair or replace the
pump with a pump of the
same model
Tighten connection
Clean the upper water
distribution system
Clean the water hose
Or remove the particles
Clogged at the pump
strainer
Place the cooling pad in
the correct position
Clean the water tank
And the cooling pads
Clean the water tank and
the cooling pad