Honda FRC800 Manual Del Propietário página 49

7.Squeeze the clutch lever, and adjust the clearance between the belt
stoppers, as illustrated.
0.04 - 0.12 in (1 - 3 mm)
8.After adjustment has been completed, fasten the belt stopper bolts
and engine mounting bolts securely.
9.Install the wire clamp, and the muffler cover.
10. Install the belt cover.
After checking or adjusting the drive belt, be sure to reinstall the belt
cover. The cover is designed to help shield you from the moving belt and
pulleys.
Contact with the moving belt or pulleys may
cause you or your clothing to get caught in
the moving parts, resulting in serious
accident or injury.
Always keep the belt cover installed when
operating the tiller.
0.28 - 0.35 in (7 - 9mm)
SERVICING YOUR TILLER
47