Publicidad
Idiomas disponibles
Idiomas disponibles
B Shaving
1
Put on the shaver head by clicking
it in.
2
For shaving, set the switch to
position 3.
3
For best results, guide the shaving
system so that about half of the
foil and one of the trimmers are in
contact with your skin. The curved
trimmer first raises all long hairs
and cuts them off. Then the flex-
ible foil follows to smooth away
any stubble. The shaving system
gives you equal shaving action on
both trimmer sides, so you can
move it forwards and backwards
as you wish.
Cleaning and maintenance
of the shaver head
4
After every use, unplug the
appliance. To remove the shaving
system, push the release
è
button
.
5
Tap the bottom on a flat surface.
6
Do not brush the foil surface in
order to avoid damaging it.
7
Oil the trimmers sparingly with
sewing machine oil at least
every 3 months. Add some
vaseline into the left and right
of the opening in the center of
the shaving system.
8
Give the inside of the shaver head
housing a quick clean.
9
Click in the shaving system and
put on the protective cap.
Note: Do not shave with a damaged
foil. In such case, have the shaving
system replaced at a Braun Service
Center.
Subject to change without notice.
11
Publicidad
