Mx Onda MX-CPV2037C Manual De Instrucciones página 21

To disconnect the steam station from the network, gently
pull the plug from the socket. Never do it by pulling the
cable.
To avoid overloading the electrical network, do not use
another high consumption device at the same time in the
same socket as the ironing center.
In case of failure, anomalies, if the ironing center has
fallen, the plug or other parts have deteriorated, or the
cable is damaged, turn off the appliance and do not try to
repair it on your own. Contact the nearest MX ONDA
Official Technical Service.
USE OF THE STEAM STATION
Preparation for use
1. Check that the voltage of your outlet is 230 V with an earth connection.
2. Remove the protective cardboard that covers the sole of the iron.
3. Unroll and completely straighten both the power cable 9 as well as the
hose 8.
4. Place the steam station on a horizontal, stable and level surface, place the
iron in the support area of the main unit.
Handle for transporting the steam station
The ironing center incorporates a folding handle to facilitate transport. To
remove the handle, pull it upwards (Fig.1) until you hear "click", indicating that it
is retained. When you want to pick up the handle, press and hold the retention
buttons 10 (UNLOCK) on both sides of the main unit, while pushing the handle
forward of the main unit (Fig.2).
Fig. 1
Note: The handle include a internal safety switch, which shuts off the
steam station when the handle is raised.
Fig. 2
6