Control Panel - Mx Onda MX-CPV2037C Manual De Instrucciones

Indicator
Temperature
International
symbol
Type of tissue
Ironing
instructions
Use of steam
Before proceeding to iron, we recommend you classify the garments according
to the type of fabric (synthetic, silk, wool, cotton, linen, etc.) and so, you can
select the appropriate temperature for each of them.
It is quite common, that the labels that incorporate the garments include the
international symbol of ironing temperature.
It is recommended that you start your ironing session with those garments
whose fabrics require lower temperature (nylon, acrylics, synthetics, etc.) and
finish with the most resistant (linen, denim clothes, etc.). In this way you will
save time and electricity. Keep in mind that your iron takes less time to warm
up than to cool down.
Note:
If the garment to be ironed is composed of the mixture of two or more fabrics
(for example, 60% polyester and 40% cotton), you must choose the
temperature corresponding to the most sensitive fiber, in the case of the
example choose the average temperature  WOOL SILK.
If you do not know the material with which the garment you want to iron is
made, first try it in a non visible place to obtain the proper ironing temperature.

CONTROL PANEL

The operating indicator of the water pump, the steam flow regulator and the
general on / off switch are located on the control panel.
SYNTHETIC
Low temperature

Synthetics, nylon,
acrylic, acetate
Dry ironing, on
the back of the
garment
NOT
WOOL / SILK
Medium
temperature
 
Wool, polyester,
silk
Use a cloth and
iron on the back
of the garment
Steam level
LOW
8
COTTON
High temperature
  
Cotton, rayon,
thread, linen
Iron while the
garment is still
wet
Steam level
MIDLE-HIGH
MAX
Maximum
temperature
Cotton, rayon,
thread, linen
Iron while the
garment is still
wet
Steam level
HIGH