Vertical Steam; Protective Devices - Mx Onda MX-CPV2037C Manual De Instrucciones

The steam station will be ready when the temperature indicator light 5 goes
off for the first time, you can carry out the ironing
After ironing, turn off the ironing center by means of the main switch and
turn the temperature selector 7 to the position marked "MIN", then unplug
the ironing center from the mains socket and wait for it to cool down
completely before moving or manipulating it.

VERTICAL STEAM

Follow the procedure described for steam ironing.
Place the iron in vertical position and at a distance of
the garment between 5 and 15 centimeters, then
press the button 6 (
This function is very useful to remove curtains of
curtains or clothes hanging on a hanger.
Notes:
To avoid injury extreme precautions in this mode of use.
Do not use the steam function continuously for more than 2 minutes at a
time, use the steam function at short intervals of time.

PROTECTIVE DEVICES

This device incorporates several protection circuits, which automatically switch
off the ironing center in case of overheating of the iron or water pump.
If the appliance stops working during ironing, unplug the ironing center from the
mains socket, wait 30 minutes and restart the ironing center. Not before
checking that the water tank is full (in the case of ironing with steam) and that
the filter and the water tank are correctly coupled.
ANTI-LIME SYSTEM
The anti-lime system cartridge is designed to avoid calcareous formations in
the sleeves and inside the plate, which can occur during steam ironing. The
use of this filter will prolong the life of your iron and reduce the natural process
of calcareous formation. The duration of the anti-scale filter will depend on
the type of water used and the use of the steam station. To replace the
anti-scale filter, follow the procedure described for filling the water tank.
Old
filter
) to perform the vertical ironing.
New
filter
11