Publicidad
Idiomas disponibles
Idiomas disponibles
• Leaking or damaged batteries can cause burns if they come into contact with the skin. Therefore, use suitable
protective gloves in this case.
• Liquids leaking from batteries are chemically very aggressive. Objects or surfaces that come into contact with
them can be severely damaged.
CAUTION!
Risk of injury!
The light from the LED lamp is bright and can damage the eyes when viewed from an insufficient distance.
•
Never look into the illuminated LED lamp from a short distance.
•
Never look at the illuminated LED lamp with a magnifying glass or other optical instruments.
IMPORTANT!
Risk of damage!
Improper handling of the product may result in damage to the product.
• Place the product on an easily accessible, level, dry, heat-resistant, and sufficiently stable work surface. Do not
place the product on the edge of the work surface.
• Never place the product on or near hot surfaces (e.g., stove tops).
• Do not bring the product and the USB Type C charging cable into contact with hot parts.
• Never expose the product to high temperature (heating, etc.) or weather (rain, etc.).
• Never pour liquid into the product.
• Never immerse the product in water for cleaning and do not use a steam cleaner for cleaning. The product may
otherwise be damaged.
• Do not use the product if the plastic components of the product are cracked or deformed. Replace damaged
components only with suitable original spare parts.
OPERATION IN DETAIL
Assembling the product
For a secure hold, mount the RGB LED table lamp (1) before first use.
Take the stand tube (5) and screw it tightly into the screw thread (7) on the top of the stand base (6).
Stand tube (5) and lampshade (4) are already connected to each other and do not need to be mounted.
Charging the product
It is recommended to fully charge the built-in battery of the RGB LED table lamp (1) before using the product
for the first time.
IMPORTANT!
Risk of damage!
Charging the product with an unsuitable USB charger may cause damage to the product.
• Only use USB chargers with max. 5 V DC output voltage for charging.
1. Place the product on a dry, horizontal surface that is not sensitive to heat for charging.
2. Unwrap the supplied USB Type C charging cable (10) completely.
3. Open the plastic cover on the bottom of the lampshade (4).
4. Insert the USB Type C plug into the USB Type C charging socket (9).
5. Insert the USB plug into a suitable USB charger or into an active USB socket (e.g., laptop, computer).
During the charging process, the LED light surface (2) on the top of the lampshade (4) lights up red.
The charging time is about 6.5 hours.
When the product is fully charged, the LED light surface (2) turns green.
You can use the product afterwards.
9
USER GUIDE
Publicidad
