Schwaiger 660166 Manual De Instrucciones página 10

USER GUIDE
• Leaking or damaged batteries can cause burns if they come into contact with the skin. Therefore, use suitable
protective gloves in this case.
• Liquids leaking from batteries are chemically very aggressive. Objects or surfaces that come into contact with
them can be severely damaged.
CAUTION!
Risk of injury!
The light from the LED lamp is bright and can damage the eyes when viewed from an insufficient distance.
• Never look into the illuminated LED lamp from a short distance.
• Never look at the illuminated LED lamp with a magnifying glass or other optical instruments.
IMPORTANT!
Risk of damage!
Improper handling of the product may result in damage to the product.
• Place and operate the product on an easily accessible, level, dry, heat-resistant, vibration-free, and sufficiently
stable base to prevent the product from falling. Do not place the product at the edge or on the edge of the base.
• Never place the product on or near hot surfaces (e.g., stove tops).
• Do not bring the product and the USB charging cable into contact with hot parts.
• Never expose the product to high temperature (heating, etc.) or weather (rain, etc.).
• Never pour liquid into the product.
• Never immerse the product in water for cleaning and do not use a steam cleaner for cleaning. The product may
otherwise be damaged.
• Do not use the product if the plastic components of the product are cracked or deformed. Replace damaged
components only with suitable original spare parts.
OPERATION IN DETAIL
Checking product and supplied package
IMPORTANT!
Risk of damage!
The product can become quickly damaged if you do not take care when opening the packaging with a sharp knife
or other sharp objects.
• Open the packaging very carefully.
1. Remove the product from the packaging.
2. Check that the supply package is complete.
3. Check that the product or individual parts are not damaged. If anything is damaged, do not use the product.
Contact the hotline or e-mail address given in this operating manual.
Assembling the product
For a secure hold, mount the RGB LED outdoor solar ta-
ble lamp (1) before using it for the first time.
Take the pole (7) and screw it tightly onto the screw
thread (9) of the base (8). Then take the lampshade (5)
and screw its screw thread (6) tightly into the pole (7).
10