Publicidad
Idiomas disponibles
Idiomas disponibles
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
A
Amperes
Hz
Hertz
W
Watt
min
Minutes
Direct Current
Alternating Current
Class II Tool
PRODUCT SPECIFICATIONS
Motor ...............................40 Volt DC,120 V, AC only, 60 Hz
Switch .................................................................... 3-Speed
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
NAME
Current
Frequency (cycles per second)
Power
Time
Type or a characteristic of current
Type of current
Double-insulated construction
FEATURES
ASSEMBLY
SYMBOLS
DESIGNATION/EXPLANATION
Power Cord Adaptor (included) .....................................4 ft.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
INSTALLING THE FAN HEAD ONTO THE
FRAME
See Figure 1, page 8.
NOTE: Do not operate the fan or connect the power cord
or battery pack without first installing the fan head onto the
frame.
Align the upper tubes on the fan head with the lower
tubes on the frame as shown. The spring-loaded locking
pins should be aligned with the holes in the lower tube.
Push the fan head and frame together until the locking
pins click into place in the holes.
5 – English
Publicidad
